Commercial Operators

COMMERCIAL GARAGE DOOR OPENERS IN ARIZONA

LiftMaster Model T Trolley Operator - Logic 5.0

Suspended from the ceiling, the operators are used on sectional overhead doors with standard lift. T operators are directly attached to drive and control the door.

MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.

Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.
LiftMaster Model T Trolley Operator - Spring repair in Glendale, AZ
MyQ Mobile App is a free download with no annual activation fee.

Security+ 2.0™ safeguards your facility – with every click, a new code is sent to the commercial door operator so the door opens only for you.
LiftMaster Gearhead Hoist Operator - Logic 5.0

Suspended from the ceiling, the operators are used on sectional overhead doors with standard lift. T operators are directly attached to drive and control the door.

MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.

Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

Security+ 2.0™ safeguards your facility – with every click, a new code is sent to the commercial door operator so the door opens only for you.
LiftMaster Model H Hoist Operator - Logic 5.0

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage. The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles. H operators are attached to the door jackshaft to indirectly drive the door.

MyQ® Technologyenables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.

Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.
MyQ Mobile Appis a free download with no annual activation fee.

Security+ 2.0™ safeguards your facility – with every click, a new code is sent to the commercial door operator so the door opens only for you.
LiftMaster Model J Jackshaft Operator - Logic 5.0

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage. The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.

J operators are attached to the door jackshaft to indirectly drive the door.

MyQ® Technologyenables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind.

Alerts can be received as email or pop-up (push) notifications on a mobile device, ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

Security+ 2.0™safeguards your facility – with every click, a new code is sent to the commercial door operator so the door opens only for you.

LiftMaster Model MT Medium-Duty Logic Trolley Operator

Applications:

The Model MT door operator is for use on standard lift sectional doors. Recommended duty cycles up to 12 per hour.
Special Features:
  • UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4, or a 4-wire monitored edge using the CPS-EI interface)
  • UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
  • Solid-state Medium-Duty Logic circuit board
  • Powerful 1/2 HP, 115V single-phase motor with instant reverse, capacitor start, and overload protection
  • Spring-loaded disconnect for emergency manual operation
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
  • First-stage heavy-duty 4L V-belt; second and third stages #48 chain
  • Heavy-duty oil-filled bushings
  • Adjustable friction clutch helps protect against damage to the door and operator
  • 3-button station for open/close/stop functionality
  • 315 MHz radio receiver is integral to the Medium-Duty Logic board
  • NEMA 1 type electrical box
  • High-strength dual L-rail track with exclusive nylon quiet-gliding chain guides on rail spacers
  • 2-year warranty
  • 1-year labor warranty

LiftMaster Model MH Medium-Duty Logic Hoist Operator


Applications:

The Model MH Door Operator is designed for use on high or vertical lift sectional doors or small rolling doors and grilles. Maximum recommended duty cycle: 12 cycles per hour.
Special Features:
  • UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4, or a 4-wire monitored edge using the CPS-EI interface)
  • UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
  • Solid-state Medium-Duty Logic circuit board
  • Powerful 1/2 HP, 115V single-phase motor with instant reverse, capacitor start, and overload protection
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism.
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
  • First stage heavy-duty 4L V-belt; second and third stages #48 chain
  • Heavy-duty oil-filled bushings
  • Adjustable friction clutch helps protect against damage to the door and operator
  • Heavy-duty solenoid-actuated brake
  • 3-button station for open/close/stop functionality
  • 315 MHz radio receiver is integral to the Medium-Duty Logic board
  • NEMA 1 type electrical box
  • 2-year warranty
  • 1-year labor warranty
LiftMaster Model MJ Medium-Duty Logic Jackshaft Operator

Applications:

The Model MJ door operator is designed for use on vertical lift sectional doors or small rolling doors and grilles. Maximum recommended duty cycle: 12 cycles per hour.
Special Features:

  • UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4, or a 4-wire monitored edge using the CPS-EI interface)
  • UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
  • Solid-state Medium-Duty Logic circuit board
  • Powerful 1/2 HP, 115V single-phase motor with instant reverse, capacitor start, and overload protection
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
  • First-stage heavy-duty 4L V-belt; second and third stages #48 chain
  • Adjustable friction clutch helps protect against damage to the door and operator
  • Heavy-duty solenoid-actuated brake
  • 3-button station for open/close/stop functionality
  • 315 MHz radio receiver is integral to the Medium-Duty Logic board
  • NEMA 1 type electrical box
  • 2-year warranty
  • 1-year labor warranty
Share by: